Editing Conf/Yawgix-Nvidia (section)

=Xorg.conf=
<pre>
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 515.43.04

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option         "Xinerama" "0"
EndSection

Section "Files"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Microstep MSI NXG253R"
    HorizSync       255.0 - 255.0
    VertRefresh     1.0 - 255.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "NVIDIA GeForce RTX 3070"
    BusID          "PCI:45:0:0"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "Stereo" "0"
    Option         "nvidiaXineramaInfoOrder" "DFP-1"
    Option         "metamodes" "1920x1080_360 +1920+1080 {AllowGSYNCCompatible=On}"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection
</pre>

Potentially necessary but not currently incorporated:
<pre>
Section "Monitor"
    Identifier     "Monitor#"
    VendorName     "Ancor"
    ModelName      "Ancor Communications Inc VE247"
    # on DP-1-5
EndSection

Section "Monitor"
    Identifier     "Monitor#"
    VendorName     "Ancor"
    ModelName      "Ancor Communications Inc ASUS VH236H"
    # on DP-1-1
EndSection

Section "Monitor"
    Identifier     "Monitor#"
    VendorName     "Acer"
    ModelName      "Acer GN246HL"
    # on DP-1-3, refresh rates below probably not obtainable in current config
    HorizSync       30.0 - 160.0
    VertRefresh     56.0 - 144.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device1"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "Quadro M2000"
    BusID          "PCI:35:0:0"
    # GPU UUID GPU-e5f83f53-b578-af25-7d6f-8c385ec8b8ff
    # PCI Device ID 0x1430
    # PCI Vendor ID 0x10de
EndSection
</pre>